Mitsubishi S6R Series Service Manual page 164

No.2 cylinder head
Replace
Removing Sequence
1 Leak-off pipe
2 Leak connector
3 Clamp
4 No.1 to 6 fuel injection pipe
Cover the openings on the fuel injection pump, nozzle inlet connector and fuel injection pipe to prevent dust from
entering the fuel system.
Note: The consisting parts at fuel inlet and outlet differ depending on the customization and specification.
Replace
Replace
To oil leak sensor
6
Replace
Fuel Injection Pipe and Fuel Leak-off Pipe - Remove and Inspect
4
8
2
5
Replace
7
5 Leak-off pipe
6 Leak-off pipe
7 Leak-off end pipe
8 Leak-off pipe
Chapter 8 FUEL SYSTEM
Double layer injection pipe spec 1
3
Replace
1
8-5