Dodge RAM 1500 1998 Owner's Manual page 2225

21 - 522 TRANSFER CASE - NV244 GENII
TRANSFER CASE - NV244 GENII (Continued)
INPUT AND PLANETARY GEAR
Fig. 32 Remove Input Gear Retaining Ring
1 - INPUT GEAR
2 - RETAINING RING
(1) Remove input gear seal with suitable screw
and slide hammer.
(2) Remove input gear retaining ring (Fig. 32) with
heavy duty snap-ring pliers.
Fig. 33 Remove Input Planetary Assembly
1 - FRONT CASE
2 - INPUT PLANETARY ASSEMBLY
(3) Place front case in horizontal position. Then
remove input gear and low range gear as an assem-
bly (Fig. 33). Tap gear out of bearing with plastic
mallet, if necessary.
INPUT AND PLANETARY GEAR
Fig. 34 Input Gear Snap-Ring Removal
1 - INPUT GEAR SNAP-RING
(1) Remove snap-ring that retains input gear in
low range gear (Fig. 34).
Fig. 35 Input Gear Retainer Removal
1 - INPUT GEAR
2 - LOW RANGE GEAR
3 - RETAINER
(2) Remove retainer (Fig. 35).
DR