Dodge RAM 1500 1998 Owner's Manual page 2128

DR
TRANSFER CASE - NV241 GENII (Continued)
(6) Remove the mode hub (Fig. 32) from the output
shaft.
Fig. 32 Remove Mode Hub
1 - OUTPUT SHAFT
2 - MODE HUB
INPUT AND PLANETARY GEAR
(1) Remove input gear seal with suitable screw
and slide hammer.
(2) Remove input gear retaining ring (Fig. 33) with
heavy duty snap-ring pliers.
Fig. 33 Remove Input Gear Retaining Ring
1 - INPUT GEAR
2 - RETAINING RING
TRANSFER CASE - NV241 GENII
(3) Place front case in horizontal position. Then
remove input gear and low range gear as an assem-
bly (Fig. 34). Tap gear out of bearing with plastic
mallet, if necessary.
Fig. 34 Remove Input Planetary Assembly
1 - FRONT CASE
2 - INPUT PLANETARY ASSEMBLY
INPUT AND PLANETARY GEAR
(1) Remove snap-ring that retains input gear in
low range gear (Fig. 35).
Fig. 35 Input Gear Snap-Ring Removal
1 - INPUT GEAR SNAP-RING
21 - 425