Dodge RAM 1500 1998 Owner's Manual page 2159

21 - 456 TRANSFER CASE - NV271
TRANSFER CASE - NV271 (Continued)
(10) Pull mainshaft assembly out of input gear,
mode sleeve, and case (Fig. 25).
Fig. 25 Remove Mainshaft Assembly
1 - FRONT CASE HALF
2 - MAINSHAFT ASSEMBLY
(11) Remove mode fork, mode sleeve, and shift rail
as assembly (Fig. 26). Note which way the sleeve fits
in the fork (long side of sleeve goes to front or the
points on the sleeve teeth go to the rear of case).
Fig. 26 Remove Mode Fork, Sleeve, and Shift Rail
Assembly
1 - SHIFT RAIL
2 - MODE FORK
3 - MODE SLEEVE
(12) Remove range fork and hub as an assembly
(Fig. 27). Note fork position for installation reference.
(13) Remove shift sector (Fig. 28).
Fig. 27 Range Fork And Hub Removal
1 - RANGE HUB
2 - RANGE FORK
Fig. 28 Remove Shift Sector
1 - SHIFT SECTOR
DR