Dodge RAM 1500 1998 Owner's Manual page 2218

DR
TRANSFER CASE - NV244 GENII (Continued)
(2) Remove the shift motor and mode sensor
assembly from the transfer case.
Fig. 4 Remove Boot Clamp
1 - SEAL BOOT
2 - CLAMP
(3) Remove the front propeller shaft seal boot
retaining clamp (Fig. 4).
Fig. 5 Remove Seal Boot
1 - SEAL BOOT
2 - SEAL SLINGER
(4) Remove the front propeller shaft seal boot (Fig.
5).
TRANSFER CASE - NV244 GENII
Fig. 6 Bend Slinger Upward
1 - SEAL SLINGER
2 - BEND UPWARD
(5) Remove the front output shaft seal slinger by
bending (Fig. 6) the slinger away from the transfer
case.
(6) Using a suitable pry tool, remove the slinger
from the output shaft using care not to damage the
shaft.
(7) Using a screw and a slide hammer, remove the
front output shaft seal.
REAR EXTENSION
(1) Remove rear extension bolts (Fig. 7).
Fig. 7 Remove Rear Extension Bolts
1 - EXTENSION HOUSING
2 - TRANSFER CASE
21 - 515