Dodge RAM 1500 1998 Owner's Manual page 2137

21 - 434 TRANSFER CASE - NV241 GENII
TRANSFER CASE - NV241 GENII (Continued)
(11) Assemble and install range fork and hub (Fig.
64). Be sure hub is properly seated in low range gear
and engaged to the input gear.
(12) Align and insert range fork pin in shift sector
slot.
(13) Install the range fork retaining ring.
Fig. 64 Install Range Fork And Hub Assembly
1 - RANGE HUB
2 - RANGE FORK
(14) Install mode fork and shift rail onto the mode
sleeve.
(15) Install the mode fork, sleeve, and shift rail
into the transfer case (Fig. 65).
Fig. 65 Install Mode Fork and Shift Rail
1 - MODE FORK
2 - SHIFT RAIL
3 - MODE SLEEVE
(16) Install mainshaft into the transfer case (Fig.
66). Guide mainshaft through the mode and range
sleeves and into the input gear.
Fig. 66 Install Mainshaft
1 - FRONT CASE
2 - MAINSHAFT
(17) Install the transfer case position sensor (Fig.
67). Tighten the sensor to 20-34 N·m (16-25 ft. lbs.)
torque.
Fig. 67 Install Position Sensor
1 - FRONT CASE
2 - POSITION SENSOR
DR