Dodge RAM 1500 1998 Owner's Manual page 1980

DR
VALVE BODY (Continued)
KICKDOWN LIMIT VALVE
The purpose of the limit valve is to prevent a 3-2
downshift at higher speeds when a part-throttle
downshift is not desirable. At these higher speeds
only a full throttle 3-2 downshift will occur. At low
road speeds (Fig. 258) the limit valve does not come
into play and does not affect the downshifts. As the
vehicle's speed increases (Fig. 259), the governor
pressure also increases. The increased governor pres-
sure acts on the reaction area of the bottom land of
the limit valve overcoming the spring force trying to
Fig. 258 Kickdown Limit Valve - Low Speeds
Fig. 259 Kickdown Limit Valve - High Speeds
AUTOMATIC TRANSMISSION - 48RE
push the valve toward the bottom of its bore. This
pushes the valve upward against the spring and bot-
toms the valve against the top of the housing. With
the valve bottomed against the housing, the throttle
pressure supplied to the valve will be closed off by
the bottom land of the limit valve. When the supply
of throttle pressure has been shut off, the 3-2 part
throttle downshift plug becomes inoperative, because
no pressure is acting on its reaction area.
21 - 277