Dodge RAM 1500 1998 Owner's Manual page 2168

DR
TRANSFER CASE - NV271 (Continued)
(4) Install remaining thrust washer (Fig. 58) in
low range gear and on top of input gear.
(5) Install retainer (Fig. 59) on input gear and
install snap-ring (Fig. 60).
Fig. 58 Install Input Gear Thrust Plate
1 - INPUT GEAR
2 - THRUST PLATE
Fig. 59 Install Input Gear Retainer
1 - INPUT GEAR
2 - RETAINER
TRANSFER CASE - NV271
Fig. 60 Install Input Gear Retaining Ring
1 - INPUT GEAR
2 - RETAINING RING
(6) Align and install low range/input gear assem-
bly in front case (Fig. 61). Be sure low range gear
pinions are engaged in annulus gear and that input
gear shaft is fully seated in front bearing.
Fig. 61 Install Input Planetary Assembly
1 - FRONT CASE
2 - INPUT PLANETARY ASSEMBLY
21 - 465