Terminal Program; Requirement; Activation And Process - Siemens Insys 56k Operating Manual

Update
6.2

Terminal Program

6.2.1

Requirement

You will need a PC and a terminal program for the firmware update. The terminal
program must be able to perform an ASCII upload (ASCII data transmission
protocol). Setting the hardware flow control is mandatory. For safety reasons, any
interpretation of characters (e.g. TAB, CR, BS, etc.) by the ASCII upload protocol
must be prevented.
The baud rate must be between 9,600 baud and 57,600 baud. Other baud rates
may lead to errors. The loading procedure takes about 2 to 3 minutes for 57,600
baud; for lower baud rates accordingly longer.
6.2.2

Activation and Process

Start of the flash update
The modem sends a response
26
Close the window when the update is completed.
Pocket Modem 56k
AT**
Download initiated...
Transmit the file
using the
terminal program.
Dezember 05