Sinaut Md720-3 In Terminal Mode; Terminal Mode Activation - Siemens SINAUT MD720-3 System Manual

SINAUT MD720-3 in Terminal Mode

In the Terminal Mode the SINAUT MD720-3 operates like a GSM modem, which is
controlled by AT commands.
Supported are
•
incoming and outgoing GSM data connections with 9600 bps with modems
being connected to the GSM network, the ISDN or the analogue telephone
network,
•
sending of SMS (Short Message Service).
4.1

Terminal mode activation

Terminal mode is the factory default setting
The SINAUT MD720-3 supports two fundamental operation modes:
•
Terminal Mode,
•
OPC Mode.
The SINAUT MD720-3 is delivered by the factory with activated Terminal Mode.
Switching from OPC Mode into the Terminal Mode
If it is necessary to switch a manually the SINAUT MD720-3 from OPC Mode into
the Terminal Mode, you will find the instructions for this in the chapter Switching
between Terminal mode and OPC Mode.
SINAUT MD720-3
C79000-G8976-C211
4
23