Triggering; Fax Logging - Siemens Insys 56k Operating Manual

Function
The modem will reply with
and expects the input of the phone number and the alarm
text in the form
For the transmission, the variable part (maximum of 80
characters) will be attached to the common part (maximum of
160 characters) of the collective message. Of the maximum of
240 characters, the first 160 characters are sent as SMS.
Some network providers support SMS forwarding to a fax
machine or an e-mail address.
All necessary information is available from the customer
service of the provider.
Please find an overview of all required settings for network
providers in German-speaking countries in the attachment.
5.6.2

Triggering

Manual triggering of the alarm message 1 or 2 via the AT
command or by connecting the inputs (PIN18, 20) with
ground.
For the transmission, all in all, 3 attempts (factory default) are
made. These values (1...12) can be changed with the S registry
S13.
When the alarm is triggered via SMS, the modem will return a
status
After the message was sent, the connection is terminated.
5.6.3

Fax Logging

All alarm messages can also be sent to a fax number for
logging reasons.
16
Message was successfully sent
Error during the message transmission
Pocket Modem 56K
new text:
<Phonenumber,Text>
AT%A<n>
ATS13=n
OK
ERROR
AT&Z3=<Phonenumber>
Dezember 05