Siemens Insys 56k Operating Manual page 57

Pocket Modem 56k
Command
AT&Z<n>
<Pause> +++
<Pause>
<Pause> ****
<Pause>
Dezember 05
Description
Save phone numbers
The command saves four entries permanently in the EEPROM. Each entry may consist of
up to 35 characters. The entries may be overwritten and must comply with the dialing
string as described in the ATD command.
AT&Z<n>=xxx n
xxx
Layout of the alarm functions and security callback:
Number of the modem or fax for a simple alarm message
AT&Z0=xxx
Service center number of the GSM provider for SMS access
Enter the callback number for security callback
AT&Z1=xxx
Number of the mobile phone for simple alarm messages
AT&Z2=xxx
Number of the fax machine for collective alarm messages
AT&Z3=xxx
Change from data mode to command mode (online command mode).
1 second pause before and after the entry, no <CR>. After the response OK, an
additional waiting period of 1 second for the re-entering of AT commands must be
observed.
Start of the remote configuration at the local modem
1 second pause before and after the entry, no <CR>. After the response OK, an
additional waiting period of 2 seconds for the re-entering of AT commands must be
observed.
is the number of the list entry (from 0 to 3).
is the dialing string with the phone number.
AT commands
51