Notes Regarding The Use Of The Manual - Siemens Insys 56k Operating Manual

Notes Regarding the Use of the Manual

3 Notes Regarding the Use of the Manual
This manual uses the symbol
notes will be marked accordingly.
All factory settings are marked with "default".
Example (Chap. 5.7.3): Enter old password (default: QWERTY)
In the Chapters 4 to 6, the description consists of two columns. On the left
side, the individual functions are described. The according AT commands
and the modem responses can be found in the right column.
Function description
Example (Chap. 5.2.7):
After the hardware reset, load the user profile 1
All AT commands start with the letters AT and end with a "Return"
(Carriage Return - CR). AT commands can be entered in capital or small
letters. The command is evaluated as soon as the modem received a
return.
In the following, the used syntax is explained:
• ATDT
• <Expression>
• [Expression]
• Expression
Examples:
• ATDT<n>
•+• AT+MS=<Modulation>, [Automode] Selection of the modulation
• Connect
Dezember 05
AT command (font: Courier, bold)
Input of a parameter (font: Courier, bold)
Input of an optional parameter
(Font: Courier, bold)
Response from the modem (font: italic)
Dialing of the phone number <n>
Dialing of the phone number 1234
ATDT1234
AT+MS=V92
AT+MS=V92,1
The connection to the remote terminal is
established
> Input prompt during the
remote configuration.
for especially important notes. Further
type
Selection of the modulation
type V.92
Selection of the modulation
type V.92 with automatic
adjustment
Pocket Modem 56k
AT command
ATZ1
2