Siemens Insys 56k Operating Manual page 33

Configuration Notes
The update is performed in two steps.
ASCII upload of the file HS_LADER.S37
ASCII upload of the firmware (xxxxxxxx.S37)
Completion of the loading procedure.
The process is finished.
Monitoring of Results:
The transfer process is indicated by dots on the monitor (of the terminal program).
Note: For the terminal program Telix, the delay settings between the character
and the lines must be set to "0" for the ASCII protocol.
Dezember 05
Pocket Modem 56k
Download Flashcode
Device
successfully
programmed
27