Send Messages; Transmission Configuration - Siemens Insys 56k Operating Manual

Pocket Modem 56k
5.6

Send Messages

Note: The sending time of an SMS from the sender to a recipient
depends on the pertinent provider of the service number.
Depending on the degree of utilization and the time of day, an
SMS may be on the way for an extended period.
5.6.1

Transmission Configuration

The modem cannot only send the alarm message to another
analogue modem, but also to a mobile phone as an SMS. Currently
GSM900 and GSM1800, and SMS to fixed networks, fax and e-mail
are available.
The maximum text length is 160 characters.
Protocol settings – see table -
Transmission
Data Connection
SMS to Mobile
SMS to Mobile
SMS to Mobile
SMS to Mobile
SMS to Mobile
or Fixed Network
Enter the service number of the network provider to send
SMS, or the phone number for fax and data connections
Definition of the collective message
Definition of the variable alarm texts and phone numbers to
send SMS (alarm text 1 or 2). After this command is activated,
the modem will query the alarm text.
Dezember 05
Protocol
PET
UCP
PET
UCP
Fax
Data format Example
D1 or
8N1
E Network
7E1
7E1
8N1 D2 Network
Function
AT*M<n>
AT*M0
AT*M1
AT*M2
AT*M3
AT*M4
AT*M5
AT*M6
AT&Z0=<Phonenumber>
AT*V
AT*V1
AT*V2
15