State-Based Softkeys - Mitel 6873i User Manual

STATE-BASED SOFTKEYS

On the 6873i phone's bottom softkeys, your System Administrator can configure a specific state
to display when a softkey is being used. The following table describes the states available to
configure for the softkeys.
STATE
Idle
Connected
Incoming
Outgoing
Busy
The following table identifies the applicable default states for each softkey type on the IP phone.
SOFTKEY TYPE
Auto Call Distribution (ACD)
BLF
BLF/List
BLF/Xfer
Call Forward
Call History
Conference
Directory
Discreet Ringing
DND
Empty
Filter
Flash
Intercom
Login
(None)
Outgoing Redial
Paging
Park
Phone Lock
Pickup
Received Callers List
Speed Dial
Speed Dial/Xfer
DESCRIPTION
The phone is not being used.
The current line is in an active call (or the call is on hold).
The phone is ringing.
The user is dialing a number, or the far-end is ringing.
The current line is busy because the line is in use or the line is set as DND.
DEFAULT STATES
Idle
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
All states disabled.
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
All states disabled.
Idle, Connected, Incoming, Outgoing, Busy
All states disabled.
Connected
All states disabled.
Idle, Outgoing
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
IP Phone Keys
Mitel | 54