Speed Dial/Mwi; Speed Dial/Xfer - Mitel 6873i User Manual

6873i User Guide for Clearspan
3. Press the Speed Dial Edit icon.
4. Press the desired type of keys you want to edit and press the Select softkey.
5. Press the desired key's Label field (if applicable) and enter a label to apply to the key.
6. Press the Number field (if applicable) and enter a number for the key using the on-screen
keyboards.
7. Press the Line field and select a line to apply to the key. This is the line that the phone
opens to dial the number after you press the respective Speed Dial key. By default, the
phone uses Line 1 for the Speed Dial key. If you want to use a different line, press the left
or right arrow buttons to select another line.
8. Press the Save softkey to save the speed dial information to the key you selected.

SPEED DIAL/MWI

The 6873i supports multiple voicemail registration by using the Speed Dial/MWI key. This feature
can be useful in scenarios where you need to monitor the voicemail accounts of your team
members or you need access to your manager's voicemail messages.
Your System Administrator can configure a programmable key, top softkey, or expansion module
softkey as "Speed Dial/MWI" and defining call and voicemail URIs, users can monitor and listen
to pending messages on multiple voicemail accounts. When new messages are pending on a
monitored voicemail account, the corresponding Speed Dial/MWI key displays the number of
pending messages beside the defined label.
When you press the configured key, the phone sends an INVITE to the configured call URI that
you can use to listen to the new messages.

SPEED DIAL/XFER

The Speed Dial key allows a number to be dialed quickly by pressing one key configured for
speed dialing. The Transfer key allows a call to be transferred to other recipients blindly or
consultatively. The Speed Dial/Xfer key combines the Speed Dial and Transfer keys'
functionality together allowing the user to transfer calls or speed dial with one key.
Note: It is recommended that you enable the Switch UI Focus to Ringing Line
parameter when using the Speed Dial/Xfer feature. For more information about this
parameter, see
77 | Mitel
"Switch UI Focus to Ringing Line" on page 86
.