2. Swipe up or down to scroll and press the party to whom you wish to transfer the active call.
3. Press the Xfer softkey. The active call will be transferred.
TRANSFERRING TO A CONTACT IN THE DIRECTORY
You can complete a transfer to a contact in the directory. If you are in a call and initiate a transfer,
you can navigate to the Directory screen and use the
transfer.
1. Connect to Party 1 (if not already connected). Party 1 is the party you want to transfer.
2. Press the Xfer softkey.
3. Press the Corporate Directory Lookup key and select a contact.
4. To complete a blind transfer, press the Xfer key again before the receiving end answers.
To complete a consultative transfer, press Dial to call the contact. Remain on the line to
key to complete a blind or consultative
Xfer
Handling Calls
Mitel | 26