State-Based Softkeys - Mitel 6867i User Manual

Mitel 6867i SIP Phone Release 4.0.0 SP1 User Guide
KEY FUNCTION
Discreet Ringing
Empty
Note: Keys can also be set up to quickly to access features such as call return (*69) or
voicemail. Quick access features like call return and voicemail must first be configured
on your PBX in order to work on your phone. See your System Administrator for more
information.

STATE-BASED SOFTKEYS

On the 6867i's bottom softkeys, you can configure a specific state to display when a softkey is
being used. The following table describes the states available to configure for the softkeys.
STATE
Idle
Connected
Incoming
Outgoing
Busy
The following table identifies the applicable default states for each softkey type on the IP phone.
SOFTKEY TYPE
None
Speed Dial
DND
XML
Flash
Sprecode
Park
Pickup
Last Call Return
Call Forward
Speed Dial/Xfer
Speed Dial/Conf
Directory
Filter
80
DESCRIPTION
Indicates the key is configured as a Discreet Ringing key. When the Discreet
Ringing feature is enabled, if a call is incoming, the phone will play the
configured ring tone once only. Pressing the Discreet key will allow you to toggle
on/off the feature.
Indicates the key has no function assigned but should be displayed as any
empty softkey on the phone's screen.
DESCRIPTION
The phone is not being used.
The current line is in an active call (or the call is on hold).
The phone is ringing.
The user is dialing a number, or the far-end is ringing.
The current line is busy because the line is in use or the line is set as DND.
DEFAULT STATES
All states disabled.
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
All states disabled.
Connected
Connected
Idle, Outgoing
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy