Object
Filtering
Mac Address
Comment
5.1.19 Bandwidth Control
Click "Operation Mode" "AP Router" or "Wireless ISP" and then enter the "Bandwidth Control" by clicking
the Setup button next to it. This section allows you to configure the bandwidth control.
Object
Quality of
Service
Type
Local IP Address
MAC Address
Uplink BandWidth
(Kbps)
Downlink
BandWidth (Kbps)
Comment
Description
Enable or disable Mac Filtering.
Enter the Mac address to be filtered.
Set a name for the rule.
Figure 5-31 Bandwidth Control Settings
Description
Enable or disable the QoS service.
Select QoS type IP Address or Mac Address.
The IP address segment which uses this QoS rule.
The Mac address which uses this QoS rule.
Set the maximum uplink bandwidth allowed by the listed QoS rules.
Set the maximum downlink bandwidth allowed by the listed QoS rules.
Set a name for the rule.
-54-
User Manual of WNAP-6325