Starting Setup In The Web Ui; Figure 4-4 Failed Result Of Ping Command; Figure 4-5 Login By Default Ip Address - Planet WNAP-6325 User Manual

If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your AP. Some
firewall software programs may block a DHCP request on newly installed adapters.

4.2 Starting Setup in the Web UI

It is easy to configure and manage the WNAP-6325 with the web browser.
Step 1. To access the configuration page, open a web browser and enter the default IP address
http://192.168.1.253
After a moment, a login window will appear. Enter admin for the User Name and Password, both in lower case
letters. Then click the OK button or press the Enter key.

Figure 4-4 Failed result of Ping command

in the web address field of the browser.

Figure 4-5 Login by default IP address

-24-
User Manual of WNAP-6325