Object
Wireless Access
Control Mode
Mac Address
Comment
5.1.10 WAN Port Settings
Click "Operation Mode" "AP Router" or "Wireless ISP" and then enter the "WAN Port Settings" by clicking
the Setup button next to it. This section allows you to configure the internet connection settings.
DHCP (Auto Config)
Choose "DHCP" and the router will automatically obtain IP addresses, subnet masks and gateway addresses
from your ISP.
Figure 5-19 Access Control
Description
You can choose "Disable", "Allow Listed" or "Deny Listed".
The MAC address to be filtered.
Enter a comment of this setting.
Figure 5-20 WAN Port Settings – DHCP
-43-
User Manual of WNAP-6325