Table of Contents
Advertisement
Step 2. In AP-1, go to "Operation Mode" to configure it to Access Point Mode.
You can also configure it in "AP Router" mode if you want to connect the WAN port of the AP
※
to the internet directly.
Step 3. Click "Setup" to configure the following parameters and then click Save & Restart to save the settings.
1)
Network ID (SSID)
2) Channel: set to a fixed one
3)
Security Setting
In this case, we configure it to WPA2-PSK, AES
: set to a unique value
: strongly suggested to configure it.
User Manual of WNAP-6325
-76-
Advertisement
Table of Contents
