Ping Watchdog; Figure 5-38 Ping Watchdog - Planet WNAP-6325 User Manual

Object
 Device Name
 POE Passthrough
 UPnP
 Syslog
 IGMP

5.2.5 Ping Watchdog

Click "System Configuration"  "Ping Watchdog" and the following page will be displayed.
Object
 Ping Watchdog
 IP Address 1
 Ping Frequency
 Failed tries
Description
Enter a name for this access point. Default is WNAP-6325.
Enable the POE Passthrough function.
※ When the option "Enable POE Passthrough" in the System
Management page is checked, the LAN2 can supply passive PoE
power to the second WNAP-7325 or WNAP-6325 through the LAN 2.
Check to enable the UPnP function.
The UPnP feature allows the devices, such as Internet computers,
to access the local host resources or devices as needed. UPnP
devices can be automatically discovered by the UPnP service
application on the LAN. This option is only available in AP
Router mode.
Check to enable Syslog function.
Check to enable the IGMP Proxy function.
This option is only available in AP Router mode.

Figure 5-38 Ping Watchdog

Description
Enable or Disable this function.
Enter the IP address which pings every time interval
Set times from 10 to 999.
Select failed tries from 1 to 5.
-59-
User Manual of WNAP-6325