Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Planet Manuals
  4. Wireless Access Point
  5. 802.11n Wireless Access Point WNAP-1120
  6. Quick installation manual

Planet 802.11n Wireless Access Point WNAP-1120 Quick Installation Manual

802.11n wireless access point
Hide thumbs Also See for 802.11n Wireless Access Point WNAP-1120:

Advertisement

Quick Links

Download this manual See also: User Manual
802.11n Wireless Access Point
WNAP-1120
Quick Installation Guide

Advertisement

loading

Related Manuals for Planet 802.11n Wireless Access Point WNAP-1120

Summary of Contents for Planet 802.11n Wireless Access Point WNAP-1120

  • Page 1 802.11n Wireless Access Point WNAP-1120 Quick Installation Guide...

  • Page 2: Table Of Contents

    Table of Contents Introduction ... 3 Package Content ..4 Installing the Access Point ... 5 Web Configuration ... 6 Further Configuration ...11...

  • Page 3: Introduction

    Introduction The WNAP-1120 is the 11n Wireless Access Point with one Ethernet port. The 1T2R 11n speed is up to 150Mbps. Fully compliant with IEEE802.11b/g standard, it provides powerful features such as the Web Configuration, Multiple SSID / VLAN tag, Built-in Radius server, MAC filter, WPA2-PSK, WPA and WPA2.

  • Page 4: Package Content

    Package Content 1 x Access Point 1 x 12V1A Power Adapter 1 x User’s Manual CD 2 x 3dBi External Antenna 1 x Ethernet Cable 1 x Quick Installation Guide If any of the above items are missing or damaged, contact your local dealer for support.

  • Page 5: Installing The Access Point

    Installing the Access Point Power Socket Connect bundled antenna to the two SMA connectors. Connect the LAN PC or network devices to WNAP-1120 LAN port with RJ-45 Ethernet cables. Connect power adapter to the power socket on WNAP-1120, and plug the other end of the power pack into an electrical outlet. After hardware connection is done, please refer to below for the configuration.

  • Page 6: Web Configuration

    Web Configuration The following instructions will guide you to complete WNAP-1120 basic settings. 1. Open your web browser and type WNAP-1120 default IP address (192.168.1.1) into the “Address Field” of you web browser. Before configuration, please make sure your PC’s IP address is under the same IP range with WNAP-1120.
  • Page 7 3. If you have entered correct User name and Password, you can see the configuration screen as below. It will show you the information of this Access Point.
  • Page 8 4. Please select the Basic Setting in the left side. Then you will see the screen as below. Please set a SSID and Channel for your wireless clients connected. When enable the Multiple ESSID function, you can apply Multiple SSID VLAN VID (0~4904) with the VLAN function. VLAN VID “0”...
  • Page 9 5. If you want to enable the Security function. Please select Security option in the list. The default setting of this option is “Disable”. You may enable WEP or WPA function to protect your wireless connec- tion. If you are select WEP in the pull-down list, you will see the dialog box below.
  • Page 10 6. Select System Utility option. You may assign a new Password and IP address to WNAP-1120 in this option. If you need a DHCP Server to your wireless network, you can also enable DHCP Server in this option to provide IP addresses to the clients.

  • Page 11: Further Configuration

    Further Configuration If you want to set WNAP-1120 to other operating mode or configure more detail settings, please refer to the User manual in the bundled CD-ROM. If you have any difficulty on resolving the problem while installing or using WNAP-1120, please feel free to contact PLANET for support.
  • Page 12 This page is intentionally left blank...