Client; Figure 5-4 Basic Settings - Client - Planet WNAP-6325 User Manual

 Transmit Distance
 TDMA
 Advanced Settings
 Access Control

5.1.2 Client

Click "Operation Mode"  "Client" and the following page will be displayed. This section allows you to
configure the Client mode.
Object
 Regulatory Domain
 Network SSID
 Site Survey
 Enable Wireless
network, input a smaller value to reduce the radio transmission
power.
Select a specified distance of the two nodes.
Displays the System Time.
Press "Setup" for more configurations. Please refer to 5.1.8
Advanced Settings for more information.
Press "Setup" for more configurations. Please refer to 5.1.9
Access Control for more information.

Figure 5-4 Basic Settings - Client

Description
Select your domain from the list.
It is the wireless network name. The default SSID is
WNAP-6325.
Click "Site Survey" to find the remote sites to associate.
Check it to enable Wireless function.
-30-
User Manual of WNAP-6325