Figure 5-17 Advanced Settings - Planet WNAP-6325 User Manual

Object
 RTS/CTS
Threshold
 Beacon Interval
 DTIM
 Fragment Size
 Short GI
 Aggregation

Figure 5-17 Advanced Settings

Description
When the length of a data packet exceeds this value, the router will send
an RTS frame to the destination wireless node, and the latter will reply
with a CTS frame, and thus they are ready to communicate. The default
value is 2347.
Set beacon interval, the value range is from 20 to 999. The default value
is 100.
Set the DTIM (delivery traffic indication message) period value of the
wireless radio. The default value is 1.
A data packet that exceeds this value in length will be divided into
multiple packets. The number of packets influences wireless network
performance. Avoid setting this value low. Default at 2346.
Guard intervals are used to ensure that distinct transmissions do not
interfere with one another. Only effect under Mixed Mode.
A part of the 802.11n standard that allows sending multiple frames per
-40-
User Manual of WNAP-6325