Table of Contents
Advertisement
4.2
Starting Setup in the Web UI
It is easy to configure and manage the CPE with the web browser.
Step 1.
To access the configuration utility, open a web-browser and enter the default IP address
http://192.168.1.253
After a m oment, a l ogin window will appear. Enter admin for the password in lower case letters. Then click
LOGIN or press the Enter key.
Default IP Address: 192.168.1.253
Default Password: admin
If the above screen does not pop up, it may mean that your web-browser has been set to a
proxy. Go to Tools menu> Internet Options> Connections> LAN Settings on the screen that
appears, uncheck Using Proxy and click OK to finish it.
in the web address field of the browser.
Figure 4-5 Login by Default IP Address
Figure 4-6 Login Window
-18-
User Manual of WBS-202N/WBS-502N
Advertisement
Table of Contents
