Juniper mesa 2 Owner's Manual page 8

English. These documents are located on our website at:
www.junipersys.com/Juniper-Systems-Rugged-Handheld-
Computers/products/Mesa-2/Support.
and print documents as desired. (Adobe Reader must be
installed on your computer. It is available from Adobe's
website at: www.adobe.com.)
Documentation will be updated during the life of the Mesa
2. Compare version numbers to see if a document has
changed.
Install the Battery Pack, Micro SD Card, and Micro SIM
Card
The Mesa 2 comes with a rechargeable and removable
Li-Ion battery pack. Install and charge the battery pack as
follows:
1. The battery compartment is accessed from the back of
the tablet. Push the battery lock switch in, slide it to the
unlocked position, and remove the door.
!
CAUTION: The Mesa 2 is not sealed against water and
dust when the battery door is not installed.
2. If you are using a micro SD card for additional memory
or a micro SIM card with the Cellular Data Modem
(optional), you can install them now before you install
the battery pack or at another time. If you do this,
make sure you replace the flexible card retainer before
installation of the battery. See
Features, SD Cards
3. Follow the graphic on the battery label to insert the
battery pack properly.
4
Mesa 2 Rugged Tablet Owner's Manual
Chapter 2, Standard
for more details.
(A)
TO ENSURE DOOR SEAL, INSERT SIDE (A) FIRST!
PARA VEDAR A PORTA, INSIRA O LADO (A) PRIMEIRO!
PARA SELLAR LA PUERTA, INSERTE PRIMERO LADO (A)
ERST SEITE (A) EINLEGEN – SICHERT TÜRDICHTUNG!
P/ VEDAR A PORTA, INSIRA O LADO (A) PRIMEIRO!
(A)
View, download,