Ribbon - Paxar 9855 Operator's Handbook Manual

R i b b o n
You have to tell the printer if your supplies require a ribbon. To
change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press l or r until you see
2. Press Enter/Pause to set the ribbon option. The current
setting is displayed, for example:
3. Press l or r to see the other options. After you display the
option you want, press Enter/Pause. Press Escape/Clear
until you see the Main Menu.
If you set the Ribbon option to Yes, install a
If you want to use a high energy ribbon,
select high energy for the ribbon every time
SUPPLY

Ribbon

RIBBON
l
Yes
ribbon before printing.
the printer is turned on.
r
r
Setting Supply Options 4-3