Delete A Stored Image; Delete All Stored Images; Call Up Menu Ring Tone Parameter - TCS IVW2221-015x Product Information

Delete a stored image

 To delete the shown image, press the naviga-
tion button DOWN for 4 s, until an acknowl-
edgement tone sounds. The image will be de-
leted. The image stored before is shown.

Delete all stored images

In the external image buffer, all images allocated to the indoor station
can be deleted completely.
 Press the menu button. The main menu appears.
 Select the symbol Delete image buffer
 Confirm the selection by pressing the menu but-
ton.
 Depending on the number of images, the dele-
tion process can take a few seconds.
If all stored images of the allocated serial number have been deleted in the FVM1000 or no stored
images are available when a call comes in, the information "empty storage" is faded in for 4 s, be-
fore the switching to the main menu.
Set ring tone parameter

Call up menu ring tone parameter

(in stand-by mode)
 Press the menu button, the main menu
appears.
 Press the navigation button RIGHT (or
LEFT), to get to the symbol ring tone

parameter
 Press the menu button again to call up
the menu ring tone parameter.
.
.
Indication empty storage
23