Notes To Users Of Facsimile Unit - Ricoh MP 2554 Series Manual

3. Other Information for This Machine
Laser Safety for Type 3, 4, and 5
This machine complies with the requirements of IEC60825-1:2007 (EN60825-1:2007) for class 1
laser product. The machine contains four 4ch-Laser Diode Arrays (4ch-LDA). Laser diodes are AlGaInP,
657–663 nanometer wavelength for each emitter. The beam divergence angle is 16 degrees
(minimum) and 23 degrees (maximum) in the vertical direction, and 7 degrees (minimum) and 12
degrees (maximum) in the horizontal direction, and laser beams are generated in Continuous Wave
(CW) mode. Each 4ch-LDA has four light sources and the maximum output power of the light source is
17 milliwatt.
The following label is attached on the rear side of the machine:
Caution:
Use of controls or adjustments or performance of procedures other than those specified in the manuals
might result in hazardous radiation exposure.

Notes to Users of Facsimile Unit

Declaration of Conformity
Notice to Users in EEA Countries
This product complies with the essential requirements and provisions of Directive 1999/5/EC of
the European Parliament and of the Council of 9 March 1999 on radio equipment and
telecommunications terminal equipment and the mutual recognition of their conformity.
Notice to Users Accessing Analog PSTN in EEA Countries
This product is designed to be able to access analog PSTN in all EEA countries. Local PSTN
compatibility is dependent on software switch settings. Please contact your service representative if
relocating this product to another country. In the event of problems, please contact your service
representative in the first instance.
The CE Declaration of Conformity is available by accessing the URL:
http://www.ricoh.co.jp/fax/ce_doc/ and selecting the product applicable.
32