Ricoh MP 2554 Series Manual page 232

10. Troubleshooting
Problem
Misfeeds occur frequently.
Misfeeds occur frequently.
Cannot print in duplex
mode.
Cannot print in duplex
mode.
Paper does not align neatly
when it is output from the
internal shift tray.
194
Cause
Paper of undetectable size
has been loaded.
There is a foreign object on
the output tray.
You have selected a paper
tray that is not set for duplex
printing.
You have selected a paper
type that cannot be used for
duplex printing.
The paper press attached to
the paper output slot of the
internal shift tray is pointed
towards the back or front of
the tray.
Solution
• Remove the misfed paper. For
details about removing jammed
paper, see "Removing Jammed
Paper", Troubleshooting.
• If you load a paper size that is not
selected automatically, you need
to specify the paper size with the
control panel. For details about
specifying paper size using the
control panel, see "Changing to a
Size That Is Not Automatically
Detected", Paper Specifications
and Adding Paper.
• Remove the misfed paper. For
details about removing jammed
paper, see "Removing Jammed
Paper", Troubleshooting.
• Do not place anything on the
output tray.
Change the setting for "Apply Duplex"
in [Tray Paper Settings] to enable
duplex printing for the paper tray. For
details about setting "Apply Duplex",
see "Tray Paper Settings", Connecting
the Machine/ System Settings.
In [Tray Paper Settings], select a paper
type that can be used for duplex
printing. For details about setting
"Paper Type", see "Tray Paper
Settings", Connecting the Machine/
System Settings.
Adjust the paper press so that it points
in the same direction as the paper that
is output.