Ricoh MP 2554 Series Manual page 256

10. Troubleshooting
Message
"Punch Cancelled"
"Staple Cancelled"
When documents cannot be stored in the Document Server
Message
"Cannot store data of this
size."
"Document Server is not
available to use. Cannot
store."
"Exceeded max. capacity of
Document Server. Cannot
store."
"Exceeded max. number of
files of Document Server.
Cannot store."
218
Cause
Punch printing was canceled.
Stapling printing was canceled.
Cause
The paper size exceeded
the capacity of the
Document Server.
You cannot use the
Document Server function.
The hard disk became full
after a file was stored.
The maximum file capacity
of the Document Server was
exceeded.
Solution
Check the paper orientation,
print orientation, and then
punch position. Certain settings
can produce print results that
might not be as expected.
Check the paper orientation,
paper quantity, print
orientation, and staple position.
Certain settings can produce
print results that might not be as
expected.
Solution
Reduce the paper size of the file that
you want to send to a size that the
Document Server can store. Custom
size files can be sent but not stored
afterward.
For details about using Document
Server function, contact your
administrator.
For details about how to set
permissions, see Security Guide.
Delete some of the files stored in the
Document Server or reduce the size
that you want to send.
Delete some of the files stored in the
Document Server.