Ricoh MP 2554 Series Manual page 329

2. The software license agreement appears in the [License Agreement] dialog box. After
reading the agreement, click [I accept the agreement.], and then click [Next >].
If installing the PostScript 3 printer driver, proceed to step 7.
3. Select a printer driver you want to use, and then click [Next >].
4. Select [Specify a new port], and then click [Next >].
5. Select [Network Printer], and then click [Next >].
6. Double-click the name of the NetWare file server on the network tree.
The created queue is displayed.
7. Select the print queue, and then click [OK].
8. Check that the port of the selected printer is displayed in [Port :].
9. Click [Continue].
The installation starts.
10. Click [Finish] in the [Select Program] dialog box.
11. After the installation is completed, select one of the options to restart the computer either
now or later, and then click [Finish].
Restart the computer to complete installation.
12. After restarting the computer, on the [Start] menu, select [Devices and Printers].
13. Right-click the machine's icon, and then click [Properties].
14. Click the [NetWare Settings] tab.
15. Clear the [Form Feed] and [Enable Banner] check boxes.
Do not select these check boxes since they are automatically selected by the printer driver. If you
select the check boxes, the printer may not print correctly.
16. Click [OK].
• The protocol is set to inactive as default. Enable the protocol on the control panel or Web Image
Monitor.
Notes when using NetWare
Form Feed
Do not use NetWare to configure form feed. Form feed is controlled by the printer driver on
Windows. If NetWare form feed is configured, the printer may not print properly.
Follow the procedure below to disable form feed according to the operating system used:
• Clear the [Form feed] check box on the [NetWare Settings] tab in the printer properties dialog
box.
Installing the Printer Driver for a Network Connection
27