Configuration; Overview - Paradyne IP DSLAM BitStorm 2600 Installation Manual

Configuration

Overview

2600-A2-GN20-40
The BitStorm 2600 is designed to require minimal configuration before it can be
accessed by a Network Operations Center (NOC). When the BitStorm 2600 is first
powered up it is a fully functional bridge, and all DSL ports are set to their
maximum speed.
Initial configuration is performed using the Command Line Interface (CLI). The CLI
is available from a terminal or PC connected to the CONSOLE port.
Additional configuration may be necessary, depending on the mode used to
manage the BitStorm 2600:
Inband
Out of band through Port 1
This can be performed using the CLI, SNMP, or the web interface.
For more configuration information, see the
IP DSLAM Command Line Interface Reference
(for the web interface).
March 2005
BitStorm 2600 and GranDSLAM 4200
(for the CLI) and the online Help
4
4-1