Port Settings Dialog Box Fields - Paradyne COMSPHERE 6700 SERIES Network Configuration Manual

Custom Network Interface Settings
NOTE:
SLIP, CSLIP, and PPP are 8 bit protocols and must have
the following settings: 8 Data Bits, 1 Stop Bit, and None
Parity.
4. Change the port settings, as needed.
5. Choose OK.
Table 5-3. Port Settings Dialog Box Fields
Field
Baud Rate
Data Bits
Stop Bits
Parity
Flow Control
Connector
Parity Check
Carrier Detect
5-8
Issue 2 December 1996
Description
Transfer data rate.
Number of data bits per byte.
Number of stop bits.
Parity.
Flow control for data transmission.
Communications port to use.
Enables indication of byte where parity error exists.
Indicates modem signal should be used.