Interfaces; Adding An Interface; Add Interface Window - Paradyne COMSPHERE 6700 SERIES Network Configuration Manual

Configuration Files and Interfaces

Interfaces

Use the Interface menu on the Custom window to add,
duplicate, or delete an interface. You must configure at least one
interface.

Adding an Interface

Use Add on the Custom window's Interface menu to add an
interface to a configuration file.
Procedure
1. Choose Settings from the Network menu. The Custom
window appears, as shown in Figure 3-1.
2. Choose Interface from the Custom window menu bar.
3. Choose Add from the Interface menu. The Add
Interface window appears, as shown in Figure 3-2.
Figure 3-2. Add Interface Window
4. Select the type of interface using the selection list
button to the right of the Type field.
5. Enter the name of the interface in the Name field. The
default is Ethernet0.
6. Choose OK.
Issue 2 December 1996
3-3