Choosing Port Settings; Port Settings Dialog Box - Paradyne COMSPHERE 6700 SERIES Network Configuration Manual

Custom Network Interface Settings

Choosing Port Settings

Use Port... to specify communications port settings for SLIP,
CSLIP, or PPP interfaces.
!
CAUTION:
Perform changes to port settings other than baud rate and
connector settings with caution. Hardware flow control is the
default setting due to binary communication requirements.
Procedure
1. Choose Settings... from the Network menu. The
Custom window appears, as shown in Figure 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose Port... from the Setup menu. The Port
Settings dialog box appears, as shown in Figure 5-5.
Table 5-3 describes the fields on the Port Settings
dialog box.
Figure 5-5. Port Settings Dialog Box
Issue 2 December 1996
5-7