Choosing Modem Settings; Modem Settings Dialog Box - Paradyne COMSPHERE 6700 SERIES Network Configuration Manual

Network management system

Hide thumbs Also See for COMSPHERE 6700 SERIES:

Table of Contents

Custom Network Interface Settings

Choosing Modem Settings

Use Modem... to specify modem interaction commands and

modes for SLIP interfaces.

Procedure

1. Choose Settings... from the Network menu. The

Custom window appears, as shown in Figure 5-1.

2. Choose Setup from the Custom window menu bar.

3. Choose Modem... from the Setup menu. The Modem

Settings dialog box appears, as shown in Figure 5-6.

Table 5-4 describes the fields on the Modem Settings

dialog box.

Figure 5-6. Modem Settings Dialog Box

4. Select the appropriate modem from those listed under

Modem Defaults. The Network Configuration feature

then uses default commands based on your choice.

If your modem is not listed, select Hayes which works

across almost all modem types. Select None to

indicate a direct null-modem connection, which does

not require any dial.

Issue 2 December 1996

5-9

Table of Contents