Custom Network Interface Settings
Viewing Network Settings
Use Settings... on the Network menu to view or customize your
communications environment. Choosing Settings... accesses
the Custom window, shown in Figure 5-1.
Figure 5-1. Custom Window
Table 5-1 describes the fields on the Custom window.
Table 5-1. Custom Window Fields (1 of 2)
Interface
Physical Address
IP Address
Subnet Mask
Host Name
Domain Name
Name
Type
5-2
Issue 2 December 1996
The name of the interface.
The physical address of the workstation.
Internet Protocol address (home address) for the
workstation.
Subnet mask bits. Used to partition IP addresses
into network and host portions.
Not required.
Not required.
Name of the interface.
Ethernet, Token Ring, FDDI, SLIP, or PPP