Custom Network Interface Settings
NOTE:
If your modem requires special settings, refer to Table 5-4
and the manual provided by your modem vendor.
5. Choose OK.
Table 5-4. Modem Settings Dialog Box Fields
Field
Dial
Hangup
Binary TX
Binary RX
Answer
Originate
Initialize
Exit
Modem Defaults
5-10
Issue 2 December 1996
Description
Dial commands (prefix and suffix).
Hangup commands (prefix and suffix).
Binary transmission commands (prefix and suffix).
Binary receive commands (prefix and suffix).
Answer on number of rings.
Set originate state.
Set initial state.
Exit AT command set.
Set all fields to selected default (none, Hayes
compatible, Telebit, or MultiTech).