Scsi Mapping Tasks; Viewing And Changing Scsi Host Information - HP StorageWorks M2402 User Manual

SCSI Mapping Tasks

Configuration tasks for SCSI mapping include:
Each task is discussed in the following paragraphs.

Viewing and Changing SCSI Host Information

To view or change current SCSI host information:
1. In the Mapping Menu screen, select the desired SCSI module and bus.
2. Click Edit/View in the Host section of the screen.
3. Enter the new settings and then click Modify.
Figure 53
Figure 53: SCSI Host Name dialog box
Network Storage Router M2402 User Guide
Manual Device Entry create a map entry for a device that is not yet
discovered or installed.
To add a new device to the map, use the drop-down boxes to enter the
settings, and then click Create Entry in the Manual Device Entry section of
the screen.
Viewing and Changing SCSI Host Information
Viewing and Changing SCSI Map Information
The SCSI Host Name dialog box is displayed. Current host information is
shown at the top of the dialog box.
is an example of the SCSI Host Name configuration dialog box.
Visual Manager User Interface
99