Trace And Event Settings Configuration - HP StorageWorks M2402 User Manual

Serial/Telnet User Interface

Trace and Event Settings Configuration

In the Configuration Menu, select Trace and Event Settings Configuration (5)
to view and change Trace and Event settings. When this option is selected, the
following menu is displayed.
Figure 94: Utility Settings (Trace Settings) menu
Trace Settings Menu options:
Each of these options is discussed in the following sections.
Configuring Trace Settings
In the Utility Trace Settings Menu, Trace Settings Configuration (1) is used to
modify trace levels. Two pages of trace level settings are displayed.
Figure 96
Note:
degradation may result.
1. To change any of the settings in these screens, enter the number that
2. Repeat Step 1 for each setting that needs to be changed in the page.
3. Before leaving the page, activate the new setting by entering Update Current
158
Trace Settings Configuration (1) configures the trace settings.
Event Settings Configuration (2) configures the event settings.
are illustrations of the two Trace Settings screens.
Trace settings should not be modified in normal operation; performance
corresponds to the option that needs to be changed.
The current setting is toggled to either On or Off.
Operating Trace levels (U).
Network Storage Router M2402 User Guide
Figure 95 and