Clearing The Entries From The Current Map - HP StorageWorks M2402 User Manual

Removing Gaps in the Map
To remove any incremental gaps in the sequence of LUN listed in the table, in the
Edit Map Entries screen, select Remove (R).
As the system removes any gaps from the table, the LUN are renumbered in
sequential order, starting with LUN 0.
Note:
order to detect all devices.
Deleting a Map Entry
To delete an entry from a map, in the Edit Map Entries screen, select Delete (D).
For Fibre Channel maps, at the prompt, either enter the LUN ID of the LUN to
delete or enter "D" to delete multiple LUN.
For SCSI maps, at the prompt, enter the Target ID and LUN ID of the LUN to
delete or enter "D" to delete multiple LUN.

Clearing the Entries from the Current Map

To remove all entries from the Current map, in the Edit Map Entries screen, select
Clear Map (3). A confirmation prompt is displayed.
Filling in the Current Map
To instruct the system to automatically fill in the Current map, in the Edit Map
Entries screen, select Fill Map (4).
All new devices are added to the end of the Current map.
After this operation is completed, the Edit Map Entries menu is redisplayed.
Note:
Network Storage Router M2402 User Guide
Some operating systems require gaps be removed in the mapping table in
Devices marked 'DOWN' are not mapped.
Serial/Telnet User Interface
151