Introduction
Fibre Channel to SCSI Protocol Process
This section describes the steps the router uses to convert FC host protocol to
SCSI device protocol.
process.
SCSI Device
SCSI Device
SCSI Device
SCSI Device
Figure 10: Converting Fibre Channel to SCSI process
1
2
3
4
5
30
Figure 10
FC Host
1
FC Host
Hub or Switch
FC Host
5
SCSI Device
SCSI Device
SCSI Device
SCSI Device
SCSI Device
SCSI Device
SCSI Device
SCSI Device
Fibre Channel
SCSI
Item
A Fibre Channel host issues an encapsulated FCP protocol
command packet to the router
The router Fibre Channel controller interprets the Fibre Channel
information, and places the packet in buffer memory.
The router interprets the Fibre Channel information packet and
programs the router SCSI controller to process the transaction.
The router SCSI controller sends the command to the SCSI device
(target).
The SCSI target interprets the command and executes it.
and the supporting table illustrate and define this
StorageWorks Router
2
FC Controller
4
SCSI Controller
SCSI Controller
SCSI Controller
SCSI Controller
Process
Network Storage Router M2402 User Guide
3