Editing The Current Map - HP StorageWorks M2402 User Manual

Editing the Current Map

In the Device Mapping Configuration menu, Edit Current Map (5) is used to
edit the current map
The Map Edit Menu sub-screen is displayed (see
Note:
Figure 79: Map Edit menu
Map Edit Menu options:
Each editing option is discussed in the following sections.
Changing the Name of the Current Map
To change the name of the current map, in the Map Edit Menu, select Edit Name
(1). Then, enter the new name at the prompt.
Note:
Network Storage Router M2402 User Guide
Auto Assigned and SCC Maps cannot be edited.
Edit Name (1) changes the name of the current map.
Edit Map Entries (2) changes the content of the current map.
Clear Map (3) erases all entries from the current map.
Fill Map (4) automatically completes the entries for the current map.
Only user-defined map names can be changed.
Serial/Telnet User Interface
Figure 79).
143