Change A Port Forwarding Rule - NETGEAR DM200 User Manual

(Continued)
Field
External port range
Internal port range
Internal IP Address
8. Click the Apply button.
Your settings are saved. The rule is added to the table on the Port Forwarding page.
9. To arrange the table entries by internal IP address, click the Arrange by internal IP button.
The lowest internal IP address displays at the top and the highest at the bottom.

Change a Port Forwarding Rule

You can change an existing port forwarding rule.
To change a port forwarding rule:
1. Launch a web browser from a computer that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
Broadband High-Speed DSL Modem Model DM200
Description
Enter one or more port numbers, one or more ranges of port numbers, or a combination
of both.
Separate ports and port ranges with commas, for example, 30, 50 - 60, 65500 - 65510.
Specify the internal ports by one of these methods:
• Leave the Use the same port range for Internal port check box selected.
• In the Internal port range field, enter one or more port number, one or more ranges
of port numbers, or a combination of both.
Separate ports and port ranges with commas, for example, 30, 50 - 60, 65500 -
65510.
Either enter a LAN IP address in the Internal IP address field or select the radio button
for an attached device that is listed in the table.
Manage Port Forwarding
92