NETGEAR DM200 User Manual page 80

Broadband High-Speed DSL Modem Model DM200
(Continued)
Field Description
Operation Mode Displays the operation mode (also called the device mode) of the modem:
•
•
LAN Port
The settings of the LAN port. For information about how to configure the LAN settings, see
LAN IP Address Settings on page 58 and
MAC Address The Media Access Control (MAC) address. This address is the unique physical address
that is assigned to the Ethernet LAN port.
IP Address The IP address that the Ethernet LAN port uses. The default IP address is 192.168.5.1.
DHCP Server Displays whether the DHCP server of the modem is enabled for devices that are attached
to the LAN.
Internet Port
The settings of Internet port. For information about how to configure the Internet settings, see one of the following
sections:
• Set Up the Modem for DSL Service and Access the Modem
• Manually Set Up an ADSL Internet Connection
• Manually Set Up a VDSL Internet Connection
MAC Address The Media Access Control (MAC) address. This address is the unique physical address
that is assigned to the Internet port.
IP Address The IP addresses that the Internet interface uses. If the field does not display an address
or displays 0.0.0.0 as the address, the modem did not obtain a connection for the interface.
Connection The type of connection that the Internet interface uses. A connection can be a PPPoE,
PPPoA, or DHCP connection or a fixed IP address connection.
Manage the Modem and Monitor the Traffic
Router. The selection from the Device Mode menu on the Device Mode page is
Router (Modem + Router). This is the default mode.
Modem. The selection from the Device Mode menu on the Device Mode page is
Modem (Modem only). For information about changing the mode, see
Modem's Routing Features and Use the Modem as a DSL Modem Only
69 or Reenable the Modem's Routing Features
Disable the Built-In DHCP Server
on page 29
on page 38
80
on page 70.
Manage the Modem's
on page 63.
on page 13
Disable the
on page