The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5.
In the Address Reservation section, select the radio button for the reserved address.
6.
Click the Delete button.
The address entry is removed.
Manage the DHCP Server Address Pool
By default, the modem acts as a Dynamic Host Configuration Protocol (DHCP) server. The modem assigns
IP, DNS server, and default gateway addresses to all computers that are connected to its LAN. The assigned
default gateway address is the LAN address of the modem.
These addresses must be part of the same IP address subnet as the modem's LAN IP address. The default
DHCP address pool is 192.168.5.2–192.168.5.254.
The modem delivers the following parameters to any LAN device that requests DHCP:
•
An IP address from the range that you define
•
Subnet mask
•
Gateway IP address (the modem's LAN IP address)
•
DNS server IP address (the modem's LAN IP address)
To specify the pool of IP addresses that the modem assigns:
1.
Launch a web browser from a computer that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the modem user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
Broadband High-Speed DSL Modem Model DM200
Manage the WAN and LAN Network Settings
62